Process-Adapted Material Characterization for Selective Laser Beam Melting Processes

Dry Coating of Particles and the Influence on the Part Density

Objective of this project is the comprehensive characterization of powders to be produced and applied within the Collaborative Research Center. The focus is on the convergence of measurement and process requirements. Besides flowability and electrostatic effects, thermal analysis will be further investigated in order to get information about the crystallization behavior of the material. Hereby, very high heating rates as well as low temperature gradients can be represented. A laser-high speed-DSC is established in order to thermally analyze the laser beam melting process in small-scale. Structure property relationships and process-structure-relationships are to be deduced to tailor favorable product properties by optimized process routes.

Professor Peukert
Professor Drummer
Maximilian Dechet
Meng Zhao


Prof. Dr.-Ing. Wolfgang Peukert

Lehrstuhl für Feststoff- und Grenzflächenverfahrenstechnik (LFG)
Friedrich-Alexander-Universität Erlangen-Nürnberg
Cauerstraße 4
91058 Erlangen
wolfgang.peukert@fau.de

Prof. Dr.-Ing. Dietmar Drummer
Lehrstuhl für Kunststofftechnik (LKT)
Friedrich-Alexander-Universität Erlangen-Nürnberg
Am Weichselgarten 9
91058 Erlangen
drummer@lkt.uni-erlangen.de

Maximilian Dechet, M.Sc.
Lehrstuhl für Feststoff- und Grenzflächenverfahrenstechnik (LFG)
Friedrich-Alexander-Universität Erlangen-Nürnberg
Haberstraße 9
91058 Erlangen
maximalian.dechet@fau.de

Meng Zhao, M.Sc.
Lehrstuhl für Kunststofftechnik (LKT)
Friedrich-Alexander-Universität Erlangen-Nürnberg
Am Weichselgarten 9
91058 Erlangen
zhao@lkt.uni-erlangen.de