Numerical modeling of local material properties and thereof derived process strategies for powder bed based additive manufacturing of bulk metallic glasses

Picture will be submitted later

The aim of this project is to facilitate additive manufacturing of bulk metallic components by selective laser melting based on predictive numerical simulations. There should be developed suitable process strategies to ensure the amorphous material state preferably without aging effects in the bulk as well as for complex geometries. Therefore, clear statements using the numerical simulation has to be made exceeding the temperature field and the material consolidation during manufacturing towards the solidification behavior, aging and finally crystallization.

Professor Drummer
Matthias Markl
Zerong Yang


Prof. Dr.-Ing. habil. Carolin Körner
Lehrstuhl für Werkstoffkunde und Technologie der Metalle (WTM)
Friedrich-Alexander-Universität Erlangen-Nürnberg
Martensstr. 5
91058 Erlangen
carolin.koerner@fau.de


Dr.-Ing. Matthias Markl
Lehrstuhl für Werkstoffkunde und Technologie der Metalle (WTM)
Friedrich-Alexander-Universität Erlangen-Nürnberg
Martensstr. 5
91058 Erlangen
matthias.markl@fau.de


Zerong Yang, M.Sc.
Lehrstuhl für Werkstoffkunde und Technologie der Metalle (WTM)
Friedrich-Alexander-Universität Erlangen-Nürnberg
Martensstr. 5
91058 Erlangen
zerong_yang@fau.de